Level 2 Award in Food Safety for Manufacturing
This qualification is ideal for everyone working in the food manufacturing industry or those about to start work in the industry. Learners gaining this qualification will know that food safety is the responsibility of everyone involved in the storage, preparation, processing, packing and handling of food.
The Level 2 Award in Food Safety for Manufacturing (RQF) is accredited and has been developed to protect customers, brand reputation and profits.
About the Course
The rigorous enforcement of food safety law is important but on its own is not sufficient to prevent food poisoning normally caused through negligence or ignorance. To reduce this a high level of food hygiene the education of food handlers receive must be achieved.
This course is specifically for those working in Food Manufacturing. We also deliver the Food Safety for Catering and the Food Safety for Retail both at Level 2.
This level 2 course will be an advantage to anyone working in the food and drink manufacturing/processing industry.
The Subjects covered are all relevant to food processing operations.
- Fresh food processing
- Ready meals manufacturing
- Canning and bottling
- Atmosphere controlled processing and packaging.
We deliver the course in several ways
- The course can be tailored for you and your organisations specific procedures and policies as long as the main syllabus is met as the multiple choice test at the end is based on this.
- The course is delivered locally for individuals and small groups in local areas throughout the year.
The Syllabus Includes:
- Introduction to food safety discussing contamination, food poisoning, food borne illness, food allergy and hazard and HACCP.
- The Law discussing the laws that applies to food manufacturing and broad requirements of the current regulations. The role of the enforcement officer, possible consequences of non compliance and that the law applies to all food handlers.
- Food Safety Hazards how the risk of food poisoning can be controlled the use of the term contamination, separation of raw and cooked products, what micro-organisms are and where these can be found, how bacteria multiply, the use of high and low temperature to control the growth of bacteria, what bacterial spores are and the special problems they can cause in the manufacturing of food.Physical,chemical and allergenic hazards.
- Temperature Controls how the reduction in temperature will minimise the multiplication of bacteria, ambient, chilled and frozen temperatures, heat treatment in different food manufacturing processes, safe methods of chilling and freezing of processed food.
- Heat Processing of Food discussing the use of high temperatures and the risks of under cooked foods the methods used to monitor and record the heat treatment. How food is preserved and how the preserved food should be stored.
- Food Handlers discussing the importance of good personal hygiene, minimising the direct handling of food, hand washing techniques, the requirements of safe protective clothing and why this is used as it is, reporting injuries and why, use of correct dressings, reporting of reportable diseases.
- Principles of Safe Food Storage of the correct storage conditions, the importance of the correct labelling of products with the different ‘use by’, ‘sell by’ and best before dates, stock rotation, and the importance of completing the traceability of raw materials, work in progress and finished products.
- Cleaning the importance of cleaning in food premises, safe disposal of food waste, and the role of cleaning to reduce the risk of contamination. How to use cleaning schedules, and the meaning and use of clean as you go policies.
- Food Premises and Equipment how and why food premises need for high standards in the buildings and the equipment used in the industry, discussing food pests and the conditions they thrive in, the signs of a pest infestation.
How long will it take me to achieve this qualification?
This is a days course with the learning completed in 7 hours and the multiple choice assessment taken immediately afterwards.
How is the qualification assessed?
This qualification is assessed by multiple-choice examination. Complete 20 questions within 45 minutes. Pass mark required is 60% (minimum of 12/20).
Individuals achieving this qualification will then be issued with a full colour Highfield certificate with their name printed. Learners can then progress onto further Level 2 courses like the Level 2 HACCP for Manufacturing and then any of the Highfield Level 3 Food Safety qualifications, which are ideal for those wishing to progress to a higher or supervisory level within a food manufacturing business.
- Everyone attending must provide photographic legal identification before taking the test
- The course runs for 1 full day we deliver this in local areas and privately on employer premises.
- To obtain the certificate everyone attending needs to successfully complete a multiple choice test paper with 30 questions requiring 12 correct answers.
- The Test papers are available in and many different languages. If prior notice is given.
- The test can be taken orally.
- Course is delivered in English. Upon request Lithuanian and Polish courses can be arranged.
Level 2 Award in Food Safety for Retail
CIEH Level 2 Award in Food Safety for Retail
This qualification will benefit anyone working in a food retail job role.
Job roles may include:
- Convenience stores.
- Corner or mobile shops.
- Petrol stations.
Working in the above premises may lead to handling food including: Frozen foods, Chilled foods, Hot Food Displays and Vending Machines.
The attendee’s role may include the handling of wrapped food or the handling (or preparation) of unwrapped food, including food subject to temperature control requirements.
Relevant job roles would include those working in
- Food storage areas.
- In-store bakeries.
- Hot food preparation.
- Service areas.
- Fish, Meat, or Fresh Produce of Delicatessen Counters within the retail environment.
People working in these roles or similar roles working full-time or even a few hours over the weekend should and handling food should obtain this qualification.
During the training programme we will include:
- The terminology used in food safety
- The laws that apply to food businesses and food handlers, and the general requirements and individual responsibilities to help businesses meet the law.
- Food hazards and how the risk of food poisoning can be reduced.
- The important role of temperature controls, how temperatures must be monitored.
- Food handlers personal hygiene.
- The importance of cleaning effectively.
- The importance of high standard of machinery and equipment to promote good hygiene in retail premises.
The course is delivered by Intrinsic Training Solutions Ltd to suit your requirements:
- The training programme is delivered over 1 day normally 6 hours
- This can be split to suit your operational requirements.
- The course can be delivered on your own site or locally if you prefer.
- Attendees complete a 30 question multiple choice test paper.
- To pass the assessment 20 correct answers are required.
- Maximum time allowed is 1 hour.
- Attendees must attend at least 80% of the course to attend the assessment
- Foreign language papers are available (with prior notice)
- Oral tests can be taken.
- The training is delivered by an experience tutor who has many years experience of the retail sector.
- All successful attendees will receive an individually named certification from one of our accredited awarding organisations.
Please contact Intrinsic Training Solutions using this convenient contact form allowing you to leave an outline of your requirements. Alternatively e-mail Intrinsictraining.com for more information or Telephone the office/fax 01536 521024.
Level 3 Award in Food Safety in Manufacturing (RQF).
This qualification is to support a role in the workplace and give learners personal growth and engagement in learning. The qualification is designed for learners who are at,or wish to progress to,a higher or supervisory level within a food manufacturing business.
Topics include ensuring compliance with food safety legislation, the application and monitoring of good hygiene practice, how to implement food safety management procedures and the application and monitoring of good practice regarding contamination,microbiology and temperature control.
How long will it take me to achieve this qualification?
The total qualification time for this qualification is 25 hours, of this 20 hours are recommended as guided learning hours.
TQT is an estimate of the total number of hours it would take an average learners to achieve and demonstrate the necessary level of attainment to be awarded with a qualification.,both under direct supervision(forming guided learning hours) and without supervision(all other time). TQT and GHL values are advisory and assigned to a qualification as guidance.
These include ensuring compliance with food safety legislation, the application and monitoring of good hygiene practice, how to implement food safety management procedures and the application and monitoring of good practice regarding contamination.microbiology and temperature control.
How is the qualification assessed?
This qualification is assessed by multiple -choice examination. Learners must complete 45 questions within 90 minutes. Pass mark of 60%(27/45).Learners will receive a Distinction of they achieve a pass mark of 80%(36/45).
- Understand the requirements for ensuring compliance with food safety legislation.
- Understand the application and monitoring of good personal hygiene practice, training and competency.
- Understand the application and monitoring of good practice to keep work areas clean, hygienic and free from pests.
- Understand the application and monitoring of good practice regarding contamination, microbiology and temperature control.
- Understand how to implement food safety management procedures.